Molded holders for lower suspension pivot pins. Marked for easy identification. Set of 12. 

Set of nylon hubs includes: four eccentric hubs for differential ball-bearings, two non-eccentric hubs for layshaft ball-bearings. Eccentric hubs allow for tightening and loosening of front and rear drive belts. 

Molded short front lower suspension arm for C-hub suspension. May be used on either left or right side. 

Molded short front lower suspension arm for C-hub suspension. Hard rigidity. May be used on either left or right side. Engraved with "H" for easy identification.  

Front One-Way Differential PRO for XRAY T1 or T1 EVO2. Front axle PRO machined from lightweight alloy, strategically machined for the lightest possible weight without compromising strength. 

New, innovation and new patent – the XRAY Multi-Diff™. This new unique front diff has three different settings: one-way / one-way solid / full-time solid axle.  

Front axle for 305101 One-Way Differential PRO. CNC machined from lightweight aircraft duraluminum, strategically machined
for the lightest possible weight without compromising strength. Includes two precision press-fit INA one-way bearings. 

CNC-machined main axle for Multi-Diff™ for XRAY T1, T1Evo2, T1R, T1M, and T1FK.
This axle does NOT fit the Multi-Diff™ for XRAY T1FK’05.
 

Multi-Diff™ locking axle is CNC-machined from Hudy Spring Steel™. Fits both #305102 and #305103 Multi-Diffs™ for all XRAY T1 cars. Must only be used with #305131 Inner Driveshaft Adapters. 

Front drive adaptors for front one-way differential. Manufactured from world-renowned top-secret "Hudy Spring Steel". These adaptors feature exclusive double slotted design, that is possible only using Hudy Spring Steel material. Ultra light, extremely strong. Set of two. 

Precision-machined, specially-lightened outdrives for use with all XRAY T1 front one-way axles (including Multi-Diff™). The new lightweight one-way out drives manufactured from Hudy Spring Steel have a hex hole machined at each end.  

High-quality, lightened molded 34 teeth pulley with special "side click-covers" for front one-way differential. 

Precision molded composite "low ratio" front pulley (32T) and side covers.
This front pulley may be used on the #305101 One-Way Differential or the #305180 Alu Solid Axle. The teeth number (32) is embossed into the side of the pulley for easy identification. 

New solid axle, CNC-machined from highest-quality lightweight aircraft duraluminum, hard coated for long life. Comes complete with pulley, covers, and hardware. 

For serious racers looking for an edge, XRAY's new ultra-true, high-durability solid front axle body is CNC machined from lightweight Delrin® composite material, making it 25% lighter than the original Multi-Diff. This solid axle transforms the XRAY Multi-Diff into a full-time solid axle only; remaining parts must be used from the Multi-Diff. Fits all XRAY touring cars.

Used by XRAY Factory Team - a "must have" for serious racers. 

Front lower spring steel pivot pins. Hardened for very high durability and long life. Set of two. 

New high-speed ball-bearings manufactured specially for XRAY. Top-quality professional ball-bearings for a super-free, super-smooth drivetrain. These highest quality ball-bearings are fitted with special polyamid blue covers, and are degreased and lightly oiled with AeroShell Fluid 12 oil for maximum smoothness, long life, highest tolerance and maximum performance.  

New high-speed ball-bearings manufactured specially for XRAY. Top-quality professional ball-bearings for a super-free, super-smooth drivetrain. These highest quality ball-bearings are fitted with special polyamid blue covers, and are degreased and lightly oiled with AeroShell Fluid 12 oil for maximum smoothness, long life, highest tolerance and maximum performance.  

Set of shims for setting static wheelbase. Fits over rear lower pivot pins, servo saver, front one-way diff and other shims. 

Hex screw M3x12. Set of 10 pieces. 

Hex screw with flat head M3x6. Set of 10 pieces. 

Hex setscrews M3x8. Set of 10 pieces. 

Hex setscrew M4x8. Set of 10 pieces. 

Special lubricant for one-way bearings used in one-way differentials or on the main layshaft. Lubricant improves engaging speed and increases one-way bearing durability. A must for the serious racer. A drop will cure a slipping one-way immediately. 

M3x8 setscrew, hex drive. Set of 10 pieces. 

M4x8 setscrew, hex drive. Set of 10 pieces. 

M3x12 button-head machine screw, hex drive. Set of 10 pieces. 

M3x6 flat-head machine screw, silver colour, hex drive. Set of 10 pieces. 

New high-speed ball-bearings manufactured specially for XRAY. ID x OD x thickness (mm) = 10x15x4. Set of 2 pieces. 

Rubber O-ring 1.5mm thick x 10mm dia. Set of 10 pieces. 

Polished chrome pin. Dia. x length = 2mm x 12mm. Set of 10 pieces.